Standard 6-Axis Hexapod Platform Positioners

Home   << Previous    Next >>
PI is the world leader in precision Hexapod design. PI's core business is ultra-precision motion control. With more than 750 employees world wide, 40 years of experience in motion control and more than two decades of hexapod mechanics, controller and software design experience, PI can get you up to speed significantly faster than anybody else. PI recently acquired miCos, another motion control specialist with hexapod design experience, to provide an even broader product offering. PI's electro-mechanical and piezoelectric Hexapod (Stewart-Gough) platform positioners have many advantages over hydraulic hexapods. They are smaller, offer much higher precision and most are self locking. Available in many sizes, configurations for loads from 2 kg to more than 1000 kg. Additional SpaceFAB parallel kinematics systems are available from PI miCos

 

The following Hexapod Platforms are standard catalog products.
Click here for additional High Force Hexapods, Vacuum Hexapods, Special & Non-Magnetic Hexapods.


H-850 Hexapod Platform High-Force 6-Axis Positioner
H-850 Hexapod
  • Up to 500 kg Load Capacity
  • 20000 h MTBF
  • Works in Any Orientation
  • 6 Degrees of Freedom
  • No Moving Cables
  • High-Load, Ultra-Low-Friction Bearings
  • Actuator Resolution to 0.005 Microns
  • Vacuum-Compatible Versions
  • Randomized Pivot Point
  • Sophisticated Controller Using Vector Algorithms
PDF Brochure |Specifications for 250 kg Version




H-811 Miniature Hexapod Platform
H-811 Small Hexapod
  • Miniature High Precision Hexapod
  • 5 kg Load
  • Actuator Resolution 0.04 µm
  • Repeatability up to ±0.5 µm
  • Velocity to 10 mm/s
  • Diameter: 130 mm, Height: 115 mm
  • XY-Travel: 35 mm; Z-Travel 13 mm
  • Rotations: Z: 40°; X&Y: 20°
Request Information | Specs / Drawings




H-810 Miniature 6-Axis Hexapod Platform Positioner
H-810 Miniature Hexapod
  • Smallest PI Standard Hexapod, yet long Travel to40x40x13mm &60°
  • 5kg Load
  • Actuator Resolution 40 Nanometers
  • Min. Incremental Motion to 200 Nanometers
  • Repeatability up to ±0.5 Microns
  • Velocity to 10 mm/sec
PDF Datasheet | Online Datasheet




H-206 Six-Axis Fiber Aligner / Manipulator Parallel Positioner
HexAlign 6-Axis Precision Alignment System / Manipulator (Hexapod)
  • Ultra-Precision Fiber Alignment System
  • Powerful 6-Axis Controller with Open Source LabView™ Drivers, DLL Libraries...
  • Integrated Fiber Alignment Routines
  • 33 Nanometers Actuator Resolution
  • Repeatability 0.3 Microns
  • No Moving Cables: Improved Reliability, Reduced Friction
  • Cartesian Coordinate Control with Virtualized Pivot Point.
PDF Datasheet | Online Datasheet




H-824 6-Axis Hexapod Platform Positioner / Microrobot with Vacuum Option
M-824 Vacuum Hexapod
  • Includes Powerful 6-Axis Controller with Open Source LabView™ Drivers, DLL Libraries...
  • Vacuum Compatible Versions
  • Load to 10 kg
  • Travel Ranges to 45 mm & 25°
  • 7 Nanometers Actuator Resolution
  • 300 Nanometers Min. Incremental Motion
  • Repeatability ±0.5 Micron
  • Self Locking to 10 kg
PDF Datasheet | Online Datasheet




H-840 Fast Six-Axis Stewart Platform Hexapod
HexaLight 6-Axis-Parallel Kinematics Microrobot
  • Six Degrees of Freedom
  • Actuator Resolution to 0.016 Micron
  • Includes Sophisticated 6-Axis Controller Using Vector Algorithms
  • No Moving Cables
  • Up to 30 kg Load Capacity
  • Repeatability to ±2 Micron
  • Significantly Smaller and Stiffer than Serial-Kinematics Systems, Better Dynamics
  • Vacuum-Compatible Versions
  • Virtualized Pivot Point
  • 20000 h MTBF
Back to TopPDF Datasheet | Online Datasheet




More Parallel Kinematics 6-Axis Positioners from PI miCos
  • SpaceFAB Parallel Kinematics 6 Axis Precision Positioners
  • Flexible Arrangement, Easy Customization
  • Long Linear Travel Ranges
  • Many Drive and Motor Options
  • Ultra High Vacuum Versions (10-9 mBar)
SpaceFab 6 Axis Precision Motorized Positioner for Vacuum

Home   << Previous    Next >>